UTA TRAX Light Rail Practice Test

These questions are part of the practice quiz. Start practicing

• What should you do if you detect smoke or fire on board?
• How should braking performance be monitored during a trip?
• Which system provides power for LRVs and their auxiliaries?
• What is the purpose of guard rail mounted to the inside of running rails?
• Who is described as a Flagger in railway operations?
• What is Ballast?
• Which term denotes the time a train spends in a station for boarding and alighting?
• Which statement describes Ballast?
• How do you perform a routine pre-departure inspection?
• What is the standard procedure if there is an onboard camera or signaling equipment failure?
• What is the purpose of the dead-man switch on a TRAX operator's control equipment?
• What should you do if you observe a track switch malfunction?
• Which of the following describes an Access Ramp?
• What is a Bumping Post?
• In interlocking terminology, fixed signals that protect the limits are also called what?
• Trailing Movement through switches is defined as what?
• The Rule Book may be supplemented by what?
• The Employee in Charge (EIC) is responsible for the safety of persons and equipment working on or near the tracks and communicates with trains to monitor movement through the affected area. What is the term for this role?
• What are Running Rails?
• Which signal governs trains entering and using a block?
• If you are instructed not to overtake a slower moving train ahead, how should you respond?
• Train:
• When communicating about a security concern, what should you provide if possible?
• Which component is responsible for braking control?
• Which term describes the alignment of the switch points that allows straight or diverging moves?
• Which statement best defines a catenary in an LRV system?
• Headway refers to what?
• Which term best describes a section of track whose use is controlled by signals?
• Which statement describes an Advisory?
• The limits of UTA owned property including and adjacent to any track are defined by which term?
• What are the steps for a standard stop at a station to ensure passenger safety?
• Which statement describes the upper limit of the service braking for the LRV/train?
• ABS stands for which system?
• Block, Manual refers to which of the following?
• What does TCC stand for?
• What are crossing gates?
• Where is an island circuit located?
• What is the function of a Switch?
• Block, Manual describes which of the following?
• Which term describes a device for mechanically and electrically joining LRVs?
• What does Flagging Protection refer to?
• ABS abbreviation.
• Interlocking signals are also called which term?
• What is a Frog?
• If a Train Operator fails to input in the designated time, what occurs?
• Which of the following should you report as a potential track fault?
• What steps should you take if a medical emergency occurs on board and you are trained to respond?
• Which description BEST defines a Yard Track?
• Which term represents the action of turning off electrical power to protect equipment and personnel?
• Which term indicates a safety warning used to indicate that equipment has been de-energized for maintenance, repair, or other reasons?
• Which role is specifically responsible for safety in work areas on or near tracks and for coordinating train movements during operations?
• The Panic Brake is derived from a combination of independently controlled brakes including which of the following?
• Why is backup lighting used during a traction outage?
• How can you maintain situational awareness when operating among dense pedestrian and vehicle traffic?
• Which option correctly describes the TRAX Control Center?
• What does SOP stand for?
• An unforeseen condition that can result in injury to passengers or employees and/or damage to equipment and property is called what?
• Which term corresponds to a device that controls traction power in trains?
• How should you respond to a steady red traffic signal controlling a TRAX track segment?
• What safety considerations apply to performing safety-critical tasks on track?
• What is a Spur Track?
• Which statement best defines Yard Limits?
• What is the role of Positive Train Control (PTC) or automatic train protection in TRAX operations?
• Operate on Sight means you should be prepared to stop within what?
• In track layout, which device is used to establish a route from one track to another?
• Block signals are also called what?
• What describes a Grade Crossing?
• Which term describes a device used to lock the position of a switch to prevent unauthorized changes?
• Which term describes the overhead conductor that provides power to the LRV through direct contact with the pantograph?
• What is a pantograph in a light rail system?
• What term describes turning off electrical power to the catenary, messenger wire, and supporting equipment?
• What is the Shop?
• Which statement best defines an Accident?
• What is a Station?
• How should you deliver passenger safety announcements?
• An Employee who is properly trained and certified and possesses the necessary licenses or certificates for duties is called what?
• What is Fouling Point Mark?
• Which type of signal is described as a low interlocking or block signal?
• Tail Track is typically located near which location?
• A track switch which must be aligned for both facing and trailing point movements is known as what?
• What is a Signal, Hand?
• What is the primary role of spotters in a rail yard environment?
• What term describes a location where passengers board or alight Light Rail Vehicles?
• What does the term Spot describe in rail operations?
• Which term describes the switches and tracks used to provide a route from one track to another?
• What describes the connecting of two or more LRVs?
• What is the correct sequence for operating the train doors at a Station Stop?
• What is a Flag in railway terminology?
• What is the correct procedure if a train encounters a door system fault at a station?
• Which term describes the number and identity of LRVs in a train?
• How should you respond to a power outage or traction failure in terms of notifying others?
• Push buttons contained in a box located adjacent to a signal used to request or cancel a route are called what?
• What is an Auxiliary Track?
• What should you do when a flashing red signal is displayed?
• What is a Signal?
• Which term describes the indication that a track is occupied even though no train is present?
• When is it appropriate to communicate about a “runaway” or out-of-control situation?
• What is the purpose of a wayfinding/station stop communication with passengers?
• What does TCU stand for?
• What is a Bulletin?
• What is the general right-of-way principle for TRAX trains at crossings and on-track segments?
• Which device is used to throw, lock, and indicate the position of a switch, consisting of a base, spindle, lever and connecting rod?
• Facing Movement through switches is defined as what?
• Which term stands for the device that controls braking functions?
• What is the procedure for reporting a track switch irregularity or misalignment?
• Light Rail Vehicle (LRV) is what?
• What is a Signal Aspect?
• Which option best describes Yard Track?
• What are the typical signs of a door operation fault you should report?
• Which term describes the push buttons used to request or cancel a route?
• Which term describes the protection of persons and equipment from movements on or near tracks?
• Mainline refers to which track?
• Which statement about Grade Crossing is true?
• Traffic, Normal Direction of:
• What is the operator's primary responsibility before starting a TRAX trip?
• What is a Signal, Fixed?
• If you hear an unusual loud bang or crash while operating, what steps should you take?
• Which term is the movement opposite to another train on the same track?
• What does a green signal or proceed aspect indicate?
• What is a Signal, Block?
• What is a Block?
• If you encounter a green signal but there is an obstacle ahead, what should you do?
• Interlocking Limits are defined as what?
• What is the proper sequence for opening doors and boarding at a Station Stop?
• TCC stands for which term?
• Which term describes the track designated for passenger or freight service that extends through yards and between stations?
• What is a Yard Lead?
• Which term defines the area within 10 feet of the centerline or within 10 feet of any high voltage conductor or appliance?
• What is the Rule Book?
• Which braking system is the ultimate level of slide-controlled braking derived from multiple independently controlled brakes and is recoverable?
• Which option accurately describes a crossover?
• What is Fouling Point?
• Which statement best defines a Slow Zone?
• How should you respond if you notice a suspicious person near the track or train?
• A pre-determined course of travel between interlockings or crossovers is known as what?
• Which device is designed to cause rolling equipment to leave the rails to avoid fouling other tracks?
• How should you respond to an onboard medical emergency?
• What actions should you take if you detect a track obstruction ahead?
• What are General Announcements?
• How should you secure a stalled TRAX train on a track?
• During a power failure or traction outage on board the train, what is the correct response?
• What is the indication of track occupancy when no train or vehicle is present?
• What term describes a qualified Employee assigned to a train or other on-track equipment where single-track protection is provided by an individual riding through the single-track area?
• What is Full Service Braking?
• A system of cameras and monitors attached to an LRV that enables Train Operators to observe the area next to the train to ensure safe movement is called what?
• What device is used for mechanically and electrically joining LRVs?
• After stopping at a flashing red signal, when may you proceed?
• Which statement best describes Single Track Operation?
• Which description most accurately defines a Spring Switch?
• What is the required approach to safety-critical tasks on track?
• Which statement correctly identifies the TRAX Control Center?
• How should you secure the cab when parked to prevent unauthorized access?
• Which speed category is not exceeding 15 MPH and requires stopping within half the range of vision?
• In the event of a stalled TRAX train, who should you notify?
• How should you handle a door fault where doors fail to close properly?
• What term refers to the makeup of a train, including all LRVs and cars?
• Which statement describes the Advisory transmission process?
• What is the proper response to a medical emergency on board?
• What is a Deadman in LRV operation?
• What is the function of the Train Monitoring System on LRVs?
• A safety warning method used to indicate that traction power substations or other equipment have been de-energized for maintenance is called what?
• What is a Switch Point Signal?
• Which term describes the ultimate level of non-slide braking achievable by the LRV/train, derived from a combination of independently controlled brakes including emergency friction brakes, track brakes, and sanding?
• Which device must be held in the operating position and will bring the LRV to a stop if released?
• What is the recommended action for personnel on the scene during a runaway situation?
• Why is it important to coordinate with maintenance before resuming service after an incident in the system?
• What does the Switch Position indicate?
• What term refers to established methods to perform a series of tasks?
• How should you communicate with the dispatcher during an incident?
• What does ATMS stand for?
• Timetable is:
• During a fare compliance check, what is the recommended conduct for conductors?
• In rail operations, which term describes the pre-determined course of travel between interlockings or crossovers?
• What term means to turn on electrical power to the catenary, messenger wire, and supporting equipment, at which time all devices connected are energized and live?
• What is the appropriate action regarding battery backup status indicators?
• Headway is defined as what?
• Which description best defines a Spur Track?
• What is the correct approach to maintain a safe following distance behind the preceding train?
• Which elements should be included in a concise incident radio transmission?
• Island Circuit is what?
• What safety precautions are required when near third-rail or high-voltage equipment?
• Which term indicates the closest point to which a train may approach a switch?
• During an evacuation, after securing passengers and opening exits, what is the next priority?
• What ADA accessibility requirements should you observe when assisting a passenger?
• What additional precautions are required when operating in a rail yard?
• What is a Signal Indication?
• What should you do when approaching a grade crossing with active warning devices?
• If you detect a track obstruction, what is the correct action sequence?
• Which option best describes the routine pre-departure inspection?
• What are the key elements of a safe station stop to ensure passenger safety before departure?
• What defines Fouling Distance?
• Which of the following is a characteristic of a fixed signal?
• An incident is defined as what?
• What is the purpose of the emergency braking system on a TRAX vehicle?
• What is an Auxiliary Track?
• Hi-Rail Vehicle is defined as which?
• Why is adherence to the PTC system essential for TRAX operators?
• Operating Clearance is a document issued to whom?
• Which term refers to the device used to dispense tickets?
• Where are the Route Selector push buttons located?
• During severe weather, why is it important to monitor signals and follow weather-specific safety procedures?
• What term refers to an electrically operated locking device within signalized territory affixed to a manually operated switch or derail to control its use?
• If you encounter a track switch irregularity, what is the recommended immediate action if it is safe to stop?
• Which option correctly defines the contact wire in an LRV system?
• What steps should you take when you encounter severe weather (wind, snow, ice) while operating TRAX?
• Which device is located in advance of a switch or on the switch stand to indicate alignment?
• What is the proper radio etiquette for TRAX operations?
• Which term refers to a physical joint designed to insulate electrical sections?
• Who is defined as anyone employed by or under contract to the Utah Transit Authority (UTA)?
• Which statement about Yard Limits is true?
• What steps should you take to ensure safe boarding and alighting on a platform when doors are opening?
• What is a Signal, Dwarf?
• Traction Power System:
• What is the total time from the instant a train stops at a station for loading until it resumes moving?
• Why is it important to report near misses and safety incidents even when no damage occurs?
• What happens if a Train Operator fails to input within the designated time?
• Which term designates the maximum allowable speed as indicated by various signals and instructions?
• Who is defined as a qualified Employee who controls the movements of a train?
• Who is the designated employee on duty in Control with authority over all movements on or affecting UTA tracks and property?
• Which components govern the mainline operations?
• In an emergency evacuation, what is your first action after stopping the train?
• How should you use the train horn and warning devices?
• Tail Track is best described as:
• Which statement best describes the TRAX Control Center?
• When a signal displays a caution or warning aspect, what is the general rule for the operator?
• What term describes the operator's compartment of an LRV?
• During a fare check, when is it appropriate to involve a supervisor?
• Which term is a daily document providing system status to operate on the alignment?
• What is a Yard Lead?
• What is a Spring Switch?
• Track Shunt:
• Which device is used to throw and lock a switch and indicate its position?
• Traffic, Reverse Direction of:
• How should you assist a passenger who requires wheelchair assistance at the platform?
• Interlocking is described as what?
• What should you do if you observe unusual signals or erratic track conditions?